high temperature differential pressure measuring instrument transmitter with valve manifolds Introduction differential pressure measuring instrument transmitter is a measure of the difference between the two ends of the transmitter ,output standard signal (eg 4 ~ 20mA, 1-5V) differential...Send InquiryChat Now
AT3051 series intelligent differential pressure transmitters adopt the capacitive sensor chip with the most mature technology, which is the most widely used by foreigners,bring in the advanced production process and technology, use modular design and all-patch-packaging components to make the differential pressure transmitter compact and perfect.
HB3351 series intelligent differential pressure transmitters have 3 models: normal analog model, conventional smart model and standard model. It can be read at night with LCD backlight. The smart series can be adjusted at site through the spot button. The maximum measuring range ratio is 50:1.
Oil, iron and steel, metallurgy, oil field, chemical industry, thermal power plant, light industry, sewage treatment, low measurement.
1. Digital Signal: ± 0.05 ;2. Analog signal: ± 0.075, ± 0.2, ± 0.5 3.
Micro range(≤ 1.5kPa): ± 0.2
0-600Ω (24VDC power)
± 0.2% FS / Year ( t = 28 °C, the maximum static pressure 6.9 MPa,
range 1:1 condition)
Zero and range
External continuously adjustable
Static pressure effect
1. Zero Error (can eliminate the static pressure)
Environmental temperature / 28 °C
1. Turndown ratio 1:1-10:1 ≤ ± 0.2% 2. Trace process (≤ 1.5kPa):
≤ ± 0.5%
<0.005% / V
arbitrary axis on the 15-2000Hz test <0.1% FS
Location of installation
a maximum of 250Pa zero may be amended, no range effect
20-1000MHz, 1 under the conditions of meters, ± 0.1% FS
Dielectric strength and reverse protection
terminal and the shell, 50Hz, 100Vpp lasted for one minute
24VDC reverse without damage
-40 - +50 °C
Cable perforation lines
M20 × 1.5M or NPT1 / 2 "
Citation pressure connection
1. Citation pressure hole: 1/4NPT internal taper pipe thread
316L, HC-276, Monel, Tantalum
drain / vent valve
316L, HC-276 or Monel optional
Sensor 0 type seal ring
NBR, PTFE, metal seals
Sensor Fill Fluid
silicone oil, fluorine oil
Outer case and coating
Low copper aluminum alloy, anodizing, painting polyurethane
1. Intrinsically safe (i) Exia ii CT6 Ga