Tuning fork level switch is a kind of new control switch, which is mainly depend on the tuning fork through the vibration principle to measure the level of material. Through the installation of the tuning fork on thebase of the tuning fork vibration of a piezoelectric crystal in the resonance frequency. When the tuning fork and the medium contact, tuning fork frequency and amplitude changes, these changes are detected by the intelligent circuit, and converts it into a switch signal.Send InquiryChat Now
Good Performance Vibration Tuning Fork Level Switch with Cheap Price
Suitable for measuring medium-density solid powders or granules that can flow freely. Also suitable for almost all liquid media, this series of tuning fork level switch can measure a variety of level, with high/low failure safety limit switch, overflow or dry run protection, pump control, showing the presence/absence of flow in the pipeline, etc. Features.
Tuning fork switch can measure a variety of level, with high / low failure safety limit switch, overflow or air running protection, pump control, display pipe with / without flow and other functions.
Tuning fork switches are mainly used for challenging liquids, including layers, contaminated waste water and hydrochloric acid, and industrial liquids such as sodium hydroxide.
The tuning fork switch has a variety of output formats, 2-wire AC, 2-wire DC, and 3-wire PNP/NPN transistors. The operation of the tuning fork level switch is independent of the conductivity, dielectric constant, viscosity, pressure and temperature of the liquid.