2" and 3" flux water flow meter with rs485 modbus protocol Basic Info of flux water flow meter Model NO.: WFD Main Application: Water, Wastewater, Corrosive Liquid/Gas Sensor: Tube/Flange Type: Electromagnetic Flow Meter Measuring Principle: Electrical Principles Certification: CE, ISO...Send InquiryChat Now
2" and 3" flux water flow meter with rs485 modbus protocol
Flux flow meters are widely used in many fields such as sewage, fluorine chemicals, production water, tap water, medicine, steel, and so on. Because the principle determines it can only measure conductive liquid. Flux flow meters are flowmeters that measure flow according to Faraday's law of electromagnetic induction. Flux flow meters have the advantage of minimal pressure loss and a large range of measurable flow rates. The ratio of the maximum flow rate to the minimum flow rate is generally more than 20:1. The applicable industrial tube diameter is wide, up to 3 meters. The output signal and the measured flow rate are linear with high accuracy. The conductivity can be measured ≥5μs/cm. Acid, alkali, salt solution, water, sewage, corrosive liquids, and fluid flow of mud, pulp, pulp, etc. However, it cannot measure the flow of gas, steam, and pure water.
Basic Info of flux water flow meter
Model NO.: WFD
Main Application: Water, Wastewater, Corrosive Liquid/Gas
Type: Electromagnetic Flow Meter
Measuring Principle: Electrical Principles
Certification: CE, ISO
Velocity Range: 0.2~8 M / S (0.66 to 26.26 FT / S)
Output: 4-20mA DC, Pulse, RS485
Media Temperature: Max 130 C
Power Supply: 220VAC or 24VDC
Lining Material: F4, PTFE, F46, Fs, Rubber
Transport Package: Carboard Box, Wooden Case
HS Code: 90261000
Size: Dn 15-800 (1/2" to 31-1/2")
Application: environmental, Industrial
Measuring Media: Liquid
Measurement Object: Closed Pipeline
Item: Flux Water Flow Meter
Electrode: 316L, Hc, Hb, Ti, Ta
Pressure: Max.16 MPa
Ambient Temperature: Sensor 80 C, Converter 50 C
Grounding: S.S, Hc, Ti, Ta, Cu
flux water flow meter
--aluminum alloy housing water flow meter, good enclosure.
--unique 6 layer circuit board design, immune to electromagnetic interference.
--fault detective supported like excitation circuit turn-off.
--plug & play terminal block
--damp-proof sealed sensor treatment
--reliable blank pipe inspection
--large choice of liner materials like F4, PTFE, F46, Fs and rubber.
--electric conductivity of medium can be used for detection of product change.
--no additional pressure loss water flow meter.
--no moveable parts and long working life.
--site digital LCD displays instantaneous flow, accumulative flow, flow rate.
--various output method, like 4-20mA, 0-5V, RS485 and pulse.
--compact, split and plug-in types optional.
--change the grounding as the third electrode.
Order sheet of flux flow meter
Intelligent electromagnetic flow meter
For example:100 represents DN100
Standard stationary type
Built-in grounding electrode
Grade of protection
Installing timing flange
Power supply source
For example:(200)represents maximum
fux corresponding to 20mA